I have thought for some time that I should drop the ribbon controller, but a few posts on FB sparked a new interest and I may now go for a DIY solution here too.
Some posts:
https://www.facebook.com/groups/68014942752/permalink/10158488144187753
https://www.youtube.com/watch?v=BdZcVEC8SZU
http://www.deviantsynth.com/2015/09/27/the-volt-axxe/?fbclid=IwAR3tjNLcU9p0SN4fNNYUZ9u39vq12uZNNZIrOOl3KMZ1sD8xJQva7cM2Gdg
https://www.kickstarter.com/projects/156507812/onestring-an-open-source-usb-ribbon-synth-controll?fbclid=IwAR2j7TtJpjW8MtI6q3Ei-PJ1pqZM9gV5V_miraengnvvDj0JxUIsqQQuh3M
Mouser have them, search for Spectra Symbol's soft pots and look under Force Sensors and Load Cells for FSR02CE
Tip: "Use a connector! Use a connector! Use a connector! Don't try to solder directly to the device. Ask me how I know..."
Problem: SoftPots are 400, 500 or 750mm, that's a bad match for a 600mm FSR
No comments:
Post a Comment