A to Synth

I'm about to make a prototype of the UI, and have been cleaning up the grid a bit. This is what it looks like right now:   Inspired by t...

I finally got around to testing the potentiometer and button breakout boards yesterday. They seem to work just fine. Button board with integ...

If I need to add overdrive to the ladder filter, I can free up one CV channel already routed to the board by using the same CV for trimming ...

I can't remember if I've written about this before, but I've certainly looked at it. EDIT: Turns out I did, in great detail! htt...

I've visited this before, but I got a bit confused when looking at the circuit, so here is some details of what is going on. JX-8P cross...

Update: Solved - it is not pulse width that is the issue, it's the pulse amp CV, just as in the waveshaper   The AS3340 suffers from a p...

As mentioned earlier, I'm not satisfied with how the VCO CVs work. Noise on the CV probably has a higher effect on the pitch than necess...

I can’t remember if I’ve written about this before, but there is apparently a way of tuning the CEM3340 (and AS3340) that is done in a singl...

The  AK317DC and NE5517 are transconductance amps compatible with the LM13700. Nice to know!

I've officially come to the conclusion that I'm not able to make the noise level any better at the moment. I've ended up at a po...

Aaaaand testing continues. NB: Most measurements are now with the VCO connected to power ground. Reducing pw to 25% to see if it affects the...